Fish sucking vacuum pump adjustable in height for lorry loading, with scale and electronic digital display mod. 500 SM3 for fish weighing without water. The pump has been conceived to automatically suck up the fish from ponds through two hot stainless steel tanks that suck and discharge alternatively self-regulated by an electric swichboard.
Sucked fish is separeted from water through a grille separator and thus sent into a container connected with a weight indicator with electronic digital display programmable either on loading quantity (with automatic drain of fish in excess) than on working times. Drain height is adjustable through an hydraulic power plant driving a piston that lifts and lowers the structure, Drain height can vary from a minimum of 135 cm to a maximum of 305 cm.
Installed on hot galvanized structure with wheels and positioning adjustable feet.
Equipped with:
- water cooling pump to obtain vacuum
- compressor for pneumatic movements HP 2 power
- electric engine HP 7.5 or 10, volts 220/380, triphase 50 Hz (or different, by request)
- hot galvanized water/fish separator
- flexible sucking hose diam. mm 150 (at request mm 200 by request)
- drain hoses diam: 200 mm
Available in different types:
- for fish until Kg 1,5
- for fish until Kg 3
- for salt water
Technical data:
Dimensions | 165x430x340 | cm |
Weight | 1550 | kg |
Voltage (three-phase) | 380 ±5% | V |
Frequency | 50 | Hz |
Total power | 9 | kW |
Pump for vacuum TRVA 65/300 | 7,5 | kW |
Tanks capacity | 200 | L/each |
Diametre of discharging pipes | 200 | mm |
Performance | 15000 | kg/h |
Prevalence max. | 5 | m |
Sucking hose | 6 | m |
Max. frame height elongation | 1,7 | m |
Min. discharging height | 1,35 | m |
Max. discharging height | 3,05 | m |